11 people looking at this right now

Nike Dream Speed Mercurial Vapor XIII Elite SG-PRO Anti-Clog White/White/Black

£250.00

Accelerate your dreams with Nike Dream Speed Mercurial Vapor XIII Elite SG-PRO Anti-Clog football boots in White/White/Black, featuring a super-fast design inspired by CR7 special edition colourways and the wider Mercurial archive.
Nike’s Dream Speed series returns for a third generation with the MDS003, built to make your dreams become reality in double-quick time. Bringing together iconic Mercurials of the past, the Dream Speed 3 features a multi-patterned design that wraps around almost the entirety of the boot for a seriously fast look. Chiefly black and white, the latest Dream Speed hints at classic colourways by way of a gradient effect on the underlying black base, while the translucent lateral-side Swoosh is smaller than on mainline Mercs, giving pride of place to the eye-catching graphics. The Nike Mercurial Vapor XIII Elite SG-PRO Anti-Clog football boots enhance fit, responsiveness on the pitch and feel even lighter on foot than ever before, providing the Mercurial player with everything they need to dominate on the pitch. Lighter and stronger than the materials used on the previous version, the Flyknit upper on this Mercurial Vapor is constructed from a high-tenacity yarn. The result is an upper that’s extremely lightweight and supremely soft, helping to reduce break-in time as the high tenacity yarn wraps around the foot for a true one-to-one fit. Created to produce a 3D micro texture on the upper for increased feel on the ball, the Flyknit is applied with the thinnest application of NIKESKIN to date, providing minimal distraction between the foot and ball while travelling at high speeds for precise control. To enable consistent levels of feel and touch in either dry or wet weather conditions, a coating of All Conditions Control (ACC) is applied to the NIKESKIN. For added comfort around the foot, the perforations around the heel have been redesigned for increased comfort and lockdown, while the internal lining that wraps around your foot has been perforated to provide breathability like no other Mercurial before. A new split design Anti-Clog Traction soleplate will prevent mud from sticking, so you maintain traction on soft natural ground surfaces.

• Dream Speed colourway worn by Cristiano Ronaldo, Sam Kerr, Ansu Fati, and Erling Haaland
• 360-degree Flyknit construction wraps your foot for a second-skin fit
• New high-tenacity yarn and a one-piece lining creates a close, secure feel
• Ultra-thin NIKESKIN overlay gets you closer to the ball for high-speed manoeuvres
• All Conditions Control (ACC) finish gives reliable touch on the ball in wet and dry conditions
• Nike Grip System eliminates any slippage within the boot
• The internal chassis system works to ensure increased responsiveness off the mark
• Split Anti-Clog Traction plate helps prevent mud from sticking, so you maintain traction in the soft natural ground surfaces
- Colour: White/White/Black
- Quick Ref: 230702
- Man. Ref: CK2032-110
- Firm Ground
  
  Boots with Firm Ground soleplates are only to be used on natural short-grass surfaces that is firm underfoot but may be slightly wet. Designed specifically for this playing surface, they offer acceleration, comfort and enhanced traction, dispersing stud pressure evenly across the foot. FG soleplates are fixed (not removable) and are used worldwide; wetter countries tend to use them spring to autumn. FG boots are not to be used on artificial ground (AG) surfaces as the construction is not designed for the extra friction. FG boots used on AG surfaces will invalidate the manufacturer’s warranty.
- Soft Ground
  
  Soft Ground (SG) soleplates are specifically designed for use on wet and soft to very soft natural grass pitches that may also be muddy and/or waterlogged. Used worldwide, mainly during winter months, boots made for soft ground have removable, replaceable screw-in studs that can be plastic, entirely metal or metal-tipped and typically come in a six-stud configuration (4 at the forefoot, 2 slightly longer at the heel). Screw-in studs must be checked and tightened before use as during manufacture they are machine-inserted and may be loose.
- Turf
  
  Turf (also called Astro Turf) is an older, more unforgiving type of synthetic-grass surface consisting of either sand or water-based carpet typically laid on concrete. Subsequently a harder and faster surface, boots for use on turf (TF) usually have a cushioned midsole and a very durable, flat, multi-lugged or dimpled rubber outsole because turf requires light stud penetration. Owing to the hard nature of the surface and the friction it creates, no other outsole type should be used on turf and will result in considerable wear to the studs and soleplate edges and may result in injury.
- Artificial Grass
  
  Artificial Grass surfaces (also known as an all-weather surface) typically consist of 3G (rubber crumb) or 4G (longer pile, combination of rubber/sand infill, more closely resembling actual grass). Fifth generation artificial grass is yet to be widely used. Boots made for AG are specifically designed, usually with less nylon to increase durability for the extra abrasion associated with synthetic grass and feature more numerous and densely concentrated studs. They may also vary in height for improved traction and/or hollowed-out to reduce weight and enhance cushioning. AG boots can also be used on firm ground (FG), though performance will depend on how dry and firm it is.
- Street
  
  Street typically describes pitches or surfaces that are often found in inner-city residential areas. They consist of varying hard surfaces such as tarmac, paved or concreted hard-court areas and are often contained by a 'cage' constructed of steel or wire netting. Shoes for play on Street (ST) pitches will have an outsole made of extra hard-wearing rubber with a multi-lugged traction pattern similar in appearance to turf shoes. They also usually have midsole cushioning for shock absorption and comfort and are equipped with extended rubber toe bumpers to cope with scuffing.
- Indoor
  
  Indoor surfaces for small-sided games such as 5-a-side and Futsal are usually flat, extremely hard and unforgiving and typically consist of varnished wood, linoleum or a smooth, painted synthetic or composite material. For grip, indoor outsoles (IN) are usually flat to maximise ground contact and slick in appearance with a minimal, non-aggressive traction pattern or grooves for flex and to dissipate surface moisture. They typically use non-marking moulded gum rubber and usually have midsole cushioning for shock absorption and comfort. Indoor shoes cannot be used on abrasive street surfaces such as concrete or gravel as they will quickly wear out.