Nike Tech Craft Mercurial Vapor XIII Elite Leather FG Black
FG - Firm Ground
Building on the 360 innovation of the XII, the Nike Tech Craft Mercurial Vapor XIII Elite Leather FG football boots feature premium kangaroo leather on the upper and Nike Aerow Trac zones in the forefoot for increased responsiveness off the mark.
The Nike Tech Craft Mercurial Vapor XIII Elite Leather FG football boots build on the 360 innovation of the XII, but with new added features to enhance fit, responsiveness on the pitch, and feel even lighter on foot.
These boots are built for high-speed play with the touch of leather. The streamlined upper is made with unstitched leather for soft touch, while a Nike Aerotrak zone on the outsole plate helps supercharge your traction.
For added comfort around the foot, the perforations around the heel have been redesigned for increased comfort and lockdown, while the internal lining that wraps around your foot had been perforated to provide breathability like no other Mercurial before.
The lightweight forefoot plate features a Nike Aerow Trac zone with micro grooves, which delivers more snap in the plate for better responsiveness off the mark. Angular chevron shaped studs combined with a stiffer internal chassis ensure explosive acceleration.
• New high-tenacity yarn and a 1-piece lining creates a close secure feel on the pitch
• Nike Grip System eliminates any slippage within the boot, while the internal chassis system works to ensure increased responsiveness off the mark
• Chevron shaped studs ensure reliable traction on firm natural ground surfaces
• Soft, premium kangaroo leather is left unstitched for a touch unlike any other.
• Explosive Acceleration
• The lightweight forefoot plate features a Nike Aerotrak zone. The angular studs help create explosive acceleration with every step
- Colour: Black
- Quick Ref: 208579
- Man. Ref: CJ6320-001
Firm GroundBoots with Firm Ground soleplates are only to be used on natural short-grass surfaces that is firm underfoot but may be slightly wet. Designed specifically for this playing surface, they offer acceleration, comfort and enhanced traction, dispersing stud pressure evenly across the foot. FG soleplates are fixed (not removable) and are used worldwide; wetter countries tend to use them spring to autumn. FG boots are not to be used on artificial ground (AG) surfaces as the construction is not designed for the extra friction. FG boots used on AG surfaces will invalidate the manufacturer’s warranty.
Soft GroundSoft Ground (SG) soleplates are specifically designed for use on wet and soft to very soft natural grass pitches that may also be muddy and/or waterlogged. Used worldwide, mainly during winter months, boots made for soft ground have removable, replaceable screw-in studs that can be plastic, entirely metal or metal-tipped and typically come in a six-stud configuration (4 at the forefoot, 2 slightly longer at the heel). Screw-in studs must be checked and tightened before use as during manufacture they are machine-inserted and may be loose.
TurfTurf (also called Astro Turf) is an older, more unforgiving type of synthetic-grass surface consisting of either sand or water-based carpet typically laid on concrete. Subsequently a harder and faster surface, boots for use on turf (TF) usually have a cushioned midsole and a very durable, flat, multi-lugged or dimpled rubber outsole because turf requires light stud penetration. Owing to the hard nature of the surface and the friction it creates, no other outsole type should be used on turf and will result in considerable wear to the studs and soleplate edges and may result in injury.
Artificial GrassArtificial Grass surfaces (also known as an all-weather surface) typically consist of 3G (rubber crumb) or 4G (longer pile, combination of rubber/sand infill, more closely resembling actual grass). Fifth generation artificial grass is yet to be widely used. Boots made for AG are specifically designed, usually with less nylon to increase durability for the extra abrasion associated with synthetic grass and feature more numerous and densely concentrated studs. They may also vary in height for improved traction and/or hollowed-out to reduce weight and enhance cushioning. AG boots can also be used on firm ground (FG), though performance will depend on how dry and firm it is.
StreetStreet typically describes pitches or surfaces that are often found in inner-city residential areas. They consist of varying hard surfaces such as tarmac, paved or concreted hard-court areas and are often contained by a 'cage' constructed of steel or wire netting. Shoes for play on Street (ST) pitches will have an outsole made of extra hard-wearing rubber with a multi-lugged traction pattern similar in appearance to turf shoes. They also usually have midsole cushioning for shock absorption and comfort and are equipped with extended rubber toe bumpers to cope with scuffing.
IndoorIndoor surfaces for small-sided games such as 5-a-side and Futsal are usually flat, extremely hard and unforgiving and typically consist of varnished wood, linoleum or a smooth, painted synthetic or composite material. For grip, indoor outsoles (IN) are usually flat to maximise ground contact and slick in appearance with a minimal, non-aggressive traction pattern or grooves for flex and to dissipate surface moisture. They typically use non-marking moulded gum rubber and usually have midsole cushioning for shock absorption and comfort. Indoor shoes cannot be used on abrasive street surfaces such as concrete or gravel as they will quickly wear out.