Puma Ultra SL X RIMAC FG/AGHigh Risk Red/Peacoat/White
FG - Firm Ground
Reach hyper speed wearing PUMA Ultra SL X RIMAC FG/AG football boots in High Risk Red/Peacoat/White, featuring a super-light design inspired by the RIMAC C_Two e-car.
PUMA’s commitment to speed continues with the PUMA Ultra SL X RIMAC FG/AG football boot, designed in collaboration with Rimac Automobili, the makers of the world’s fastest electric hypercar.
The limited edition design sees the already outrageously fast Ultra given the Super Light treatment, with weight stripped away wherever possible to create the lightest, most streamlined football boot on the market at just 90 grams.
The super-lightweight upper is made from soft, woven mesh with an ultra-thin layer of TPU skin to maintain comfort and control of the ball as you race away from opponents.
Underfoot, the boot features a revolutionary running spike-inspired soleplate for unrivalled acceleration.
Finally, at the heel, two cut-out windows further reduce weight and mimic the look of the C_Two, Rimac’s latest concept car that sprints from 0-60mph in 1.85 seconds. Defenders, you’re in trouble.
• Endorsed by Antoine Griezmann
• Limited edition Super Light football boots
• Only 412 pairs worldwide – the same number as the C_Two’s top speed of 412 km/h
• Ultra-lightweight and soft upper material
• Ultra-fast outsole infused with running spike DNA
• Weight: 90 grams
• Football boots for Firm Ground and Artificial Grass
• Please note: The Ultra SL X RIMAC is not for training days. It’s for your best days. Your match days. A non-compromise lightweight proposition, this product is about speed, not endurance. But the moments it creates will last forever.
- Colour: High Risk Red/Peacoat/White
- Quick Ref: 227219
- Man. Ref: 10623401
Firm GroundBoots with Firm Ground soleplates are only to be used on natural short-grass surfaces that is firm underfoot but may be slightly wet. Designed specifically for this playing surface, they offer acceleration, comfort and enhanced traction, dispersing stud pressure evenly across the foot. FG soleplates are fixed (not removable) and are used worldwide; wetter countries tend to use them spring to autumn. FG boots are not to be used on artificial ground (AG) surfaces as the construction is not designed for the extra friction. FG boots used on AG surfaces will invalidate the manufacturer’s warranty.
Soft GroundSoft Ground (SG) soleplates are specifically designed for use on wet and soft to very soft natural grass pitches that may also be muddy and/or waterlogged. Used worldwide, mainly during winter months, boots made for soft ground have removable, replaceable screw-in studs that can be plastic, entirely metal or metal-tipped and typically come in a six-stud configuration (4 at the forefoot, 2 slightly longer at the heel). Screw-in studs must be checked and tightened before use as during manufacture they are machine-inserted and may be loose.
TurfTurf (also called Astro Turf) is an older, more unforgiving type of synthetic-grass surface consisting of either sand or water-based carpet typically laid on concrete. Subsequently a harder and faster surface, boots for use on turf (TF) usually have a cushioned midsole and a very durable, flat, multi-lugged or dimpled rubber outsole because turf requires light stud penetration. Owing to the hard nature of the surface and the friction it creates, no other outsole type should be used on turf and will result in considerable wear to the studs and soleplate edges and may result in injury.
Artificial GrassArtificial Grass surfaces (also known as an all-weather surface) typically consist of 3G (rubber crumb) or 4G (longer pile, combination of rubber/sand infill, more closely resembling actual grass). Fifth generation artificial grass is yet to be widely used. Boots made for AG are specifically designed, usually with less nylon to increase durability for the extra abrasion associated with synthetic grass and feature more numerous and densely concentrated studs. They may also vary in height for improved traction and/or hollowed-out to reduce weight and enhance cushioning. AG boots can also be used on firm ground (FG), though performance will depend on how dry and firm it is.
StreetStreet typically describes pitches or surfaces that are often found in inner-city residential areas. They consist of varying hard surfaces such as tarmac, paved or concreted hard-court areas and are often contained by a 'cage' constructed of steel or wire netting. Shoes for play on Street (ST) pitches will have an outsole made of extra hard-wearing rubber with a multi-lugged traction pattern similar in appearance to turf shoes. They also usually have midsole cushioning for shock absorption and comfort and are equipped with extended rubber toe bumpers to cope with scuffing.
IndoorIndoor surfaces for small-sided games such as 5-a-side and Futsal are usually flat, extremely hard and unforgiving and typically consist of varnished wood, linoleum or a smooth, painted synthetic or composite material. For grip, indoor outsoles (IN) are usually flat to maximise ground contact and slick in appearance with a minimal, non-aggressive traction pattern or grooves for flex and to dissipate surface moisture. They typically use non-marking moulded gum rubber and usually have midsole cushioning for shock absorption and comfort. Indoor shoes cannot be used on abrasive street surfaces such as concrete or gravel as they will quickly wear out.
AMO Grip Lace 2.0 - Jet Black
£5.00 £10.00 Save £5.00
AMO Guard Tape 5cm - Gray Camo
£3.00 £6.00 Save £3.00
AMO Grip Lace 2.0 - Bright White
£5.00 £10.00 Save £5.00